EMI Plastics Equipment | EAC12 - 48 - 40 | 12” x 48’ Incline Belt Conveyor

Manufacturer

EMI

Category

Miscellaneous Machines

Type

MISCELLANEOUS

Stock

90-3658

Model

EAC12- 48- 40

Dealer Location

Ohio

Request a Quote
View Contact Information

Spec Sheet

Manufacturer - EMI Plastics Equipment
Model - EAC12- 48- 40 | Extruded Aluminum Frame Incline Belt Conveyor
Serial No. - 15-12179
Belt Type - EA-266-48-12-48
Belt Size & Type - 12”Wide x 48”Long | Corrugated Side
Belt Speed - 4 - 40 FPM w/Variable Speed Drive
Range of Height - 36”H (Top of Chute to Ground) 21.5”H (Bottom of Chute to Ground)
Max Load - 100lb Maximum
Infeed Hopper - 19”Wide Stainless Steel
Cleat Spacing - 4” (approx.)
Cleat Depth - 1-1/2” Deep
Conveyor Frame - Extruded Aluminum Frame
Electrical Specs - 1/3hp | 110V/115V/120V / 3.5amp / Single Phase, 50/60 Hz
Weight - Approx. 250lbs
Overall Dimensions - 41”L x 29”W x 52"H(approx) Please See Pictures for other measurements
Manufacturer Date - N/A
Seller Note: - Unit is USED / BUT IN GOOD CONDITION. Conveyor shows some signs of wear, scratching, stickers peeling, but none affecting the intended use of the conveyor. This unit has been tested as seen in the video and functions as intended. Belt runs smooth with no binding noted when running. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. Full crating of the unit will be an extra cost, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.


EMI Plastics Equipment

EAC12 - 48 - 40

12” x 48’ Incline Belt Conveyor

Manufacturer:

EMI Plastics Equipment

Model:

EAC12- 48- 40 |  Extruded Aluminum Frame Incline Belt Conveyor

Serial No.:

15-12179

Belt Type:

EA-266-48-12-48

Belt Size & Type:

12”Wide x 48”Long | Corrugated Side

Belt Speed: 

4 - 40 FPM w/Variable Speed Drive

Range of Height:

36”H (Top of Chute to Ground)  21.5”H (Bottom of Chute to Ground)

Max Load:

100lb Maximum

Indeed Hopper:

 19”Wide Stainless Steel

Cleat Spacing:

4” (approx.)

Cleat Depth:

1-1/2”

Conveyor Frame:

Stainless Steel Belt Pan

Electrical Specs:

1/3hp  |  110V/115V/120V / 3.5amp / Single Phase, 50/60 Hz

Weight:

Approx. 250lbs

  Overall Dimensions:

41”L x 29”W x 52"H(approx) Please See Pictures for other measurements

Manufacturer Date:

N/A

 

 

Seller Note:

Unit is USED / BUT IN GOOD CONDITION. The conveyor shows some signs of wear, scratching, stickers peeling, but none affecting the intended use of the conveyor. This unit has been tested as seen in the video and functions as intended. Belt runs smooth with no binding noted when running. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. Full crating of the unit will be an extra cost, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. 

 

 

 

 

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote