Ross 18-Cu.Ft. S.S. Ribbon Blender

Manufacturer

ROSS MIXERS

Category

Miscellaneous Machines

Type

MIXERS, RIBBON

Stock

90-SSRB

Model

18-Cu.Ft. Stainless Steel Ribbon Blender

Dealer Location

Ohio

Request a Quote
View Contact Information

Spec Sheet

Manufacturer - Charles Ross & Son Company
Model - 18-Cu.Ft. Stainless Steel Ribbon Blender
Serial No. - N/A
Discharge Outlet - Bottom Discharge
Horsepower - 5-HP
Trough Size - 60”L x 24”W x 28”D || Straight side is 17”
Height to Discharge - 36” to 38” (approx.) Pivot Style Stopper
Working Capacity - 18 Cu.Ft. / 134 Gallons (approx.)
Full Capacity - 22 Cu.Ft. / 165 Gallons (approx.)
Material - 304 Stainless Steel
Manufacture Date - N/A
Electrical Specs - 208/230/480V, Three Phase, 14 / 7amps, 60Hz
Overall Dimensions - 95”L x 26”W x 72”D (approx.)
Weight - Approx: 2500lbs (approx.)
Seller Note: - Unit is USED with some minor surface wear and some minor scratches/scuffs along with some cosmetic marks on the trough/bowl but none affecting the functionality or the intended use of the unit. Units condition overall is exceptionally clean with no debris or residue on the inside. Unit was removed from a working environment with no issues noted when removed (not able to verify exact previous product mixed with ribbon blender). What you see in the pictures is what is included in sale (Skidding/Palletizing IS NOT included with the sale, but can be purchased at an extra cost). This unit has been run, tested with no issues noted. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures & video are of the actual unit being purchased. If the buyer has any questions, please feel free to ask.
EXTRAS: - As seen in the pictures and video, this units has been gone over and inspected. New belts have been installed, contractor, on/off pendent and safety switch all work properly. Unit is quiet with no rubbing or scuffing of the ribbon on the inside of the trough.


Ross

18-Cu.Ft. S.S. Ribbon Blender

Manufacturer:

Charles Ross & Son Company

Model:

18-Cu.Ft. Stainless Steel Ribbon Blender

Serial No.:

N/A

Horsepower:

5-HP

Trough Size:

60”L x 24”W x 28”D || Straight side is 17”

Working Capacity:

18 Cu.Ft. / 134 Gallons (approx.)

Full Capacity:

22 Cu.Ft. / 165 Gallons (approx.)

Material:

304 Stainless Steel

Discharge:

Bottom Discharge

Height to Discharge:

36” to 38” (approx.) Pivot Style Stopper

Electrical Specs:

208/230/480V, Three Phase, 14 / 7amps, 60Hz

Manufacture Date:

N/A

Overall Dimensions:

95”L x 26”W x 72”D (approx.)

Weight:

Approx: 2500lbs (approx.)

 

 

EXTRA:

As seen in the pictures and video, this units has been gone over and inspected. New belts have been installed, contractor, on/off pendent and safety switch all work properly. Unit is quiet with no rubbing or scuffing of the ribbon on the inside of the trough.

 

 

Seller Note:

Unit is USED with some minor surface wear and some minor scratches/scuffs along with some cosmetic marks on the trough/bowl but none affecting the functionality or the intended use of the unit. Units condition overall is exceptionally clean with no debris or residue on the inside. Unit was removed from a working environment with no issues noted when removed (not able to verify exact previous product mixed with ribbon blender). What you see in the pictures is what is included in sale (Skidding/Palletizing IS NOT included with the sale, but can be purchased at an extra cost). This unit has been run, tested with no issues noted. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures & video are of the actual unit being purchased. If the buyer has any questions, please feel free to ask.

 

 

 

 

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote