Aaron Equipment Jacketed 11-Cu.Ft. Ribbon Blender

Manufacturer

AARON PROCESS EQUIPMENT

Category

Miscellaneous Machines

Type

MIXERS, RIBBON

Stock

90-XXAE

Model

11-Cu.Ft. Jacketed Ribbon Blender

Dealer Location

Ohio

Request a Quote
View Contact Information

Spec Sheet

Manufacturer - Aaron Process Equipment
Model - 11-Cu.Ft. Jacketed Ribbon Blender (approx.)
Serial No. - N/A
Discharge Outlet - Bottom Discharge 6” Fitting
Horsepower - 5-HP
Trough Size - 48”L x 24”W x 28”D || Straight side is 18”
Working Capacity - 11 Cu.Ft. (approx.)
Full Capacity - 12 Cu.Ft. (approx.)
Material - Stainless Steel
Manufacture Date - N/A
Electrical Specs - 127/220V, Single Phase, 25.8/11.1amps, 60Hz, 1740rpm max
Overall Dimensions - 240/460V, Three Phase, 14.2 / 7.1amps, 60Hz, 1740rpm max
Weight - Approx: 1000lbs (approx.)
Seller Note: - Unit is USED with visible minor surface wear and some minor scratches/scuffs along with some cosmetic marks none affecting the functionality or the intended use of the unit. Unit condition overall is clean with some dried debris on the inside that can be cleaned out / removed. Unit was removed from a working environment with no issues noted when removed (not able to verify exact previous product mixed with ribbon blender). What you see in the pictures is what is included in sale (Skidding/Palletizing IS NOT included with the sale, but can be purchased at an extra cost). This unit has been run and tested with no issues noted. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask.
EXTRAS: - This ribbon blenders jacket has been pressure tested to the recommended 45psi. No leaks in the jacket were observed and pressure held. Picture of press gauge can be seen along with it in the video of the pressure being released


Aaron Equipment

Jacketed 11-Cu.Ft. Ribbon Blender

Manufacturer:

Arron Process Equipment

Model:

11-Cu.Ft. Jacketed Ribbon Blender (approx.)

Serial No.:

N/A

Jacketed Bowl:

Yes

Horsepower:

5-HP

Trough Size:

48”L x 24”W x 28”D || Straight  side is 18”

Working Capacity:

11 Cu.Ft. (approx.)

Full Capacity:

12 Cu.Ft. (approx.)

Material:

Stainless Steel

Discharge:

Bottom Discharge 6” Fitting

Height to Discharge:

52” (approx.) w/o valve

Electrical Specs:

240/460V, Three Phase, 14.2 / 7.1amps, 60Hz, 1740rpm max

Manufacture Date:

N/A

Overall Dimensions:

87”W x 28”L x 84”D (approx.)

Weight:

Approx: 1000lbs (approx.)

 

 

EXTRA:

This ribbon blender jacket has been pressure tested to the recommended 45psi. No leaks in the jacket were observed and pressure was held. A picture of press gauge can be seen along with it in the video of the pressure being released

 

 

Seller Note:

Unit is USED with visible minor surface wear and some minor scratches/scuffs along with some cosmetic marks on the trough/bowl but none affecting the functionality or the intended use of the unit. Unit condition overall is clean with some dried debris on the inside that can be cleaned out / removed. Unit was removed from a working environment with no issues noted when removed (not able to verify exact previous product mixed with ribbon blender). What you see in the pictures is what is included in sale (Skidding/Palletizing IS NOT included with the sale, but can be purchased at an extra cost). This unit has been run, tested and pressure tested with no issues noted. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask.

 

 

 

 

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote