ARPAC Model: 25TW-28 Intermittent Motion Tray Wrapper

Manufacturer

ARPAC

Category

Miscellaneous Machines

Type

WRAPPERS

Stock

90-ZZAA

Model

25TW-28

Dealer Location

Ohio

Request a Quote
View Contact Information

Spec Sheet

Manufacturer - ARPAC Group
Model - 25TW-28
Serial No. - 5746
Machine Speed - Up to 25 Trays per minute (Approx)
Product Range Width - 6” - 18” Width across machine (AM) (Approx)
Product Range Length - 7” - 20” Length down machine (DM) (Approx)
Product Range Height - 4” - 12” (Approx)
Film - Max Film width 27” single wound Clear or Randomly Printed (Approx)
Film Roll Diameter - Up to 14” with 3” Core (Approx)
Film Gauge - Up to 6mil maximum
Film Type - Low Density Polyethylene (L.D.P.E.)
Electrical Specs - 460VAC, 3-Phase, 32amps, 60Hz
Air Specs - 80psi, 15SCFM
Overall Machine Dims - 62”W x 144”L x 77”H (Approx) (Some dimensions may be smaller or large on actual machine)
Weight - 4500 - 5000 lbs (approx)
Manufacture Date - N/A
Seller Note: - Unit is USED. Some minor scratching/blemishes/surface rust can be seen on the surfaces of the unit, but is not affecting the unit intended use. Unit has warehouse dust/grime (seen in pictures) on the unit but can be cleaned with no issues. The unit was removed a working environment and was functioning as intended when removed from service. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.


ARPAC Model: 25TW-28

Intermittent Motion Tray Wrapper

Manufacturer:

ARPAC Group

Model:

25TW-28

Serial No.:

5746

Machine Speed:

Up to 25 Trays per minute (Approx)

Product Range W/L:

6” - 18” Width across machine (AM) (Approx)

 

7” - 20” Length down machine (DM) (Approx)

Product Range Height:

4” - 12”  (Approx)

Film:

Max Film width 27” single wound  Clear or Randomly Printed (Approx)

Film Roll Diameter:

Up to 14” with 3” Core (Approx)

Film Gauge:

Up to 6mil maximum

Film Type:

Low Density Polyethylene (L.D.P.E.)

Electrical Specs:

460VAC, 3-Phase, 32amps, 60Hz,

Air Specs:

80psi, 15SCFM

Overall Machine Dims:

62”W x 144”L x 77”H (Approx) Height does not include jib crane attached

Manufacture Date:

N/A

 

 

Seller Notes:

Unit is USED. Some minor scratching/blemishes/surface rust can be seen on the surfaces of the unit, but is not affecting the unit intended use. Unit has warehouse dust/grime (seen in pictures) on the unit but can be cleaned with no issues. The unit was removed a working environment and was functioning as intended when removed from service. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. 

 

 

 

 

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote