Axon THERMOPOINT Steam Tunnel | Shrink Sleever | Sleever Tunnel

Manufacturer

AXON

Category

Miscellaneous Machines

Type

SHRINK TUNNELS

Stock

90-3510

Model

THERMOPOINT

Dealer Location

Ohio

Request a Quote
View Contact Information

Spec Sheet

Manufacturer - Axon Corporation
Model - THERMOPOINT
Serial No. - G-120803A
Type - Steam / Shrink / Sleever Tunnel
Container Size Range - 6”W x 15”H
Openings - 9.5” max opening
Steam Supply Required - 80psi
Steam Consumption - 200lbs/hr - 30 gallons per hour - Approx.
Heating Zones - 3-Zone Tunnel with access doors on each side - Inner & Outer doors/covers
Machine Speed - Application Specific
Blower Motor - 1/2Hp
Electrical Specs - 115/230 Volts, Single Phase, 50/60Hz
Frame Material: - All Stainless Steel Construction for easy cleaning & maintaining
Frame Construction - Double Wall Shell Keeps Outer Surface Temps Cooler
Manufacture Date - 2012
Overall Dimensions - 24”W x 79”L x 77”H
Weight - Approx: 1200lbs
Seller Notes - Units is USED. Some minor scratching/blemishes/streaking can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed from a working environment and was functioning as intended when removed from service. There are NO EXTRAS, NO STEAM GENERATOR, or NO CONVEYOR INCLUDED, besides what you see with the unit pictured. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. Full crating or palletizing of the unit will be an extra cost. Unit will need a custom built skid/pallet due to size. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. All specifications are assumed to be correct, but must be confirmed and verified by the purchasing customer.
EXTRAS: - NO CONVEYOR INCLUDED WITH THE STEAM TUNNEL


Axon THERMOPOINT 

Steam Tunnel | Shrink Sleever | Sleever Tunnel

Manufacturer:

Axon Corporation

Machine No.:

THERMOPOINT

Serial No.:

G-120803A

Type:

Steam / Shrink / Sleever Tunnel

Container Size Range:

6”W x 15”H 

Length:

8’7”

Openings:

9.5” max opening

Steam Supply Required:

80psi

Steam Consumption:

200lbs/hr - 30 gallons per hour - Approx.

Heating Zones:

3-Zone Tunnel with access doors on each side - Inner & Outer doors/covers

Speed:

Application Specific

Blower Motor:

1/2Hp

Electrical Specs:

115/230 Volts, Single Phase, 50/60Hz

Frame Material: 

All Stainless Steel Construction for easy cleaning & maintaining

Construction:

Double Wall Shell Keeps Outer Surface Temps Cooler

Manufacture Date:

2012

Overall Dimensions:

24”W x 79”L x 77”H

Weight:

Approx: 1200lbs

 

 

Seller Note:

Units is USED. Some minor scratching/blemishes/streaking can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed from a working environment and was functioning as intended when removed from service. There are NO EXTRAS, NO STEAM GENERATOR, or NO CONVEYOR INCLUDED, besides what you see with the unit pictured. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. Full crating or palletizing of the unit will be an extra cost. Unit will need a custom built skid/pallet due to size. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.  All specifications are assumed to be correct, but must be confirmed and verified by the purchasing customer.

 

 

 

 

EXTRAS:

NO CONVEYOR INCLUDED WITH THE STEAM TUNNEL

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote