Seinmex 5 Cu.Ft. Ribbon Blender

Manufacturer

SEINMAX

Category

Miscellaneous Machines

Type

MIXERS, RIBBON

Stock

90-3455

Model

N/A

Dealer Location

Ohio

Request a Quote
View Contact Information

Spec Sheet

Manufacturer - Seinmax
Model - N/A
Serial No. - N/A
Horsepower - 1.15-HP
Trough Size - 27.5”W x 20”L x 15”D
Working Capacity - 5 Cu.Ft. /// 37 gallons
Full Capacity - 7 Cu.Ft. /// 52 gallons
Solids Agitator - Air Agitator attached to side of the bowl
Material - Stainless Steel
Manufacture Date - N/A
Electrical Specs - 127/220V, Single Phase, 25.8/11.1amps, 60Hz, 1740rpm max
Overall Dimensions - 44”W x 44”L x 56”D (approx.)
Weight - Approx: 300lbs (approx.)
Seller Note: - Unit is USED with visible minor surface wear and some minor scratches/scuffs along with some cosmetic marks none affecting the functionality or the intended use of the unit. Unit condition overall is clean with some dried debris on the inside that can be cleaned out / removed. Unit was removed from a working environment with no issues noted when removed (not able to verify exact previous product mixed with ribbon blender). What you see in the pictures is what is included in sale (Skidding/Palletizing IS NOT included with the sale, but can be purchased at an extra cost). This unit has been run and tested with no issues noted. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask.


Seinmex 5 Cu.Ft. Ribbon Blender

Manufacturer:

Seinmax

Model:

N/A

Serial No.:

N/A

Horsepower:

1.15-HP

Trough Size:

27.5”W x 20”L x 15”D

Working Capacity:

5 Cu.Ft. ///  37 gallons

Full Capacity:

7 Cu.Ft. ///  52 gallons

Agitator:

Air Agitator attached to the side of the bowl

Material:

Stainless Steel

Discharge:

Bottom Discharge 3” Sanitary Fitting with Valve

Electrical Specs:

127/220V, Single Phase, 25.8/11.1amps, 60Hz, 1740rpm max

Manufacture Date:

N/A

Overall Dimensions:

44”W x 44”L x 56”D (approx.)

Weight:

Approx: 300lbs (approx.)

 

 

Seller Note:

Unit is USED with visible minor surface wear and some minor scratches/scuffs along with some cosmetic marks none affecting the functionality or the intended use of the unit. Unit condition overall is clean with some dried debris on the side that can be cleaned out / removed. Unit was removed from a working environment with no issues noted when removed (not able to verify exact previous product mixed with ribbon blender). What you see in the pictures is what is included in sale (Skidding/Palletizing IS NOT included with the sale, but can be purchased at an extra cost). This unit has been run and tested with no issues noted. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask.

 

 

 

 

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote