USED ELUMATEC CNC ALUMINUM PROFILE MACHINING CENTER / ROUTER MODEL SBZ 122/64, Stock# 11054, Yea

Manufacturer

ELUMATEC

Category

Machining Centers

Type

MACHINING CENTERS, ALUMINUM PROFILE

Stock

11054

Model

SBZ122/64

Dealer Location

Michigan

Request a Quote
View Contact Information

Spec Sheet



Brand: Elumatec
Model: SBZ 122/64

Designed for economical and efficient machining of aluminum, PVC and thin-walled steel profiles, the Elumatec SBZ 122/64 is a machining center that can process 3 sides of a profile without moving the work piece. This is the perfect machine for automatic door manufacturing with a single or multiple locks or other industrial applications. With the extended bed length, the machine has the capability of machining one long part or machining a part that's up to 1/2 the bed length allowing for loading / unloading a part on the other side of the bed.

All operations, such as routing, drilling and tapping, are performed while the profile bar is stationary to protect the profile surfaces
Better machining results thanks to the intelligent control technology
Fast positioning of the machining unit with up to 120 m/min thanks to dynamic servo drives
Tapping without compensation chuck
Automatic tool changer for an angle head
State-of-the-art 3-axis controller
Automatic clamp recognition and positioning prevents collisions
Power torque routing motor with enclosed speed control for short spindle start-up and braking times.
Machine configuration
A material stop on the left
Tool holder HSK-F63
Routing spindle with integrated rotation unit (0°, -90°, -180° and -270°) for angle head


X-axis routing capacity face side up: 263.78"
Y-axis routing capacity: 13.75"
Routing capacity top: 9"
Routing capacity front: 7"
Table capacity Z-axis: 11"
Routing capacity top: 11"
Step over capacity: 7.3"
Rapid positioning Y-Z axes: 196 FPM max.
Rapid positioning X axis: 98 FPM max.
Max spindle speed: 24,000 RPM
Spindle power: 28 H.P.
Max. profile height / Ste over max: 11"
Max. diameter of tooling: 2.48"
Max. diameter of disc cutter: 7.87" manual / 3.62" automatic
Max. air pressure: 102 PSI
Max. length of tooling: 5.90"
Max. diameter shaft for ER-32 collet: .78"
Max. diameter shaft for ER-16 collet (angle head cap collet): .511"
Max. diameter shaft for 077 collet: .394"
Tapping capacity: .0375" @65% thread
Tool chuck: HSK F63
Tool holder for automatic tool change: 6
Weight: 7,500 Lbs. 


Equipped with: 
Right angle head
Spindle cooling unit
PC based control with Elucam software and handheld pendent control 
Pneumatic retractable material stop
Air conditioned electrical enclosure 
Machining for 3 sides of profile
Linear guides for X, Y, Z travel
Profile is held by adjustable pneumatic clamps
Automatic tool changer
Pulse spray mist coolant
Tool height gauge
Light curtains

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote