Lantech SW-1000 Intermittent Motion Belt Feed Side Seal Wrapper w/ Lantech ST-900 Heat Tunnel

Manufacturer

LANTECH

Category

Miscellaneous Machines

Type

WRAPPERS

Stock

90-3154

Model

SW-1000 Intermittent Motion Belt Feed Side Seal Wrapper

Dealer Location

Ohio

Request a Quote
View Contact Information

Spec Sheet

Manufacturer - Lantech Systems
Model - SW-1000 Wrapper // ST-900 Heat Tunnel
Serial No. - SW-000144
Machine Type - Intermittent Motion
Film Inverting Head - Standard Adjustable
Infeed Conveyor - 15” Width Belt
Cross Seal Size - 18”
Product Sizes - MIN - 3”L x 1”W x 1/8”H /// Max - InfiniteL x 15”W x 8”H
Packages/Speed - 40 Packages Per Minute (Approx.) - Speed - Feet/Minute up to 90 (Approx.)
Film Width - 6” - 24”
Trim Winder - Mechanical w/Electronic Tension Control
Cross Seal Type - Hot Knife
Controls - PLC / HMI Touchscreen
Electrical Specs: - 208/230Volts, Single Phase, 13.5Amps, 60Hz
Air Specs - 5 - 8 CFM @85PSI
Operating Height - 34.5” - 39.5” (Adjustable)
Overall Machine Dims - 72”L x 45”W x 66”H (Approx.)
Manufacture Date - N/A
Weight - Approx. 1600lbs - wrapper machine only
EXTRAS: - The Lantech ST-900 Shrink Tunnel is also included in the sale. Please call or email for more specific information if needed on the shrink tunnel.
Seller Note: - Units is USED. Some minor scratching/blemishes/scraps/small dents can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed a working environment and was functioning as intended when removed from service. The unit will need a cleaning due to some warehouse dust on the machine. There are NO EXTRA ACCESSORIES INCLUDED, besides what you see with the unit pictured. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. Full crating or skidding of the unit will be an extra cost. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.


Lantech SW-1000 Intermittent Motion 

Belt Feed Side Seal Wrapper

w/ Lantech ST-900 Heat Tunnel

Manufacturer:

Lantech Systems

Model:

SW-1000 Wrapper   //   ST-900 Heat Tunnel

Serial No.:

SW-000144

Machine Type:

Intermittent Motion

Film Inverting Head:

Standard Adjustable

Indeed Conveyor:

15” Width Belt

Cross Seal Size:

18”

Product Sizes:

MIN - 3”L x 1”W x 1/8”H   ///  Max - InfiniteL x 15”W x 8”H

Packages/Speed:

40 Packages Per Minute (Approx.) -  Speed - Feet/Minute up to 90 (Approx.)

Film Width:

6” - 24”

Trim Winder:

Mechanical w/Electronic Tension Control

Cross Seal Type:

Hot Knife

Controls:

PLC / HMI Touchscreen

Electrical Specs:

208/230Volts, Single Phase, 13.5Amps, 60Hz

Air Requirements:

5 - 8 CFM @85PSI

Operating Height:

34.5” - 39.5” (Adjustable)

Overall Dimensions:

72”L x 45”W x 66”H (Approx.)

Manufactured Date: 

N/A

Weight:

Approx. 1600lbs - wrapper only

 

 

EXTRAS:

The Lantech ST-900 Shrink Tunnel is also included in the sale. Please call or email for more specific information if needed on the shrink tunnel.

 

 

Seller Note:

Units is USED. Some minor scratching/blemishes/scraps/small dents can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed a working environment and was functioning as intended when removed from service. The unit will need a cleaning due to some warehouse dust on the machine. There are NO EXTRA ACCESSORIES INCLUDED, besides what you see with the unit pictured. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. Full crating or skidding of the unit will be an extra cost. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. 

 

 

 

 

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote