Cosen Dual column 16" Programable bandsaw Model C-4038NC, 1.5" Blade, Reconditioned, like Amada, Doall, marvel, Spartan, Hyd-Mech, Hem

Cosen Dual column 16" Programable bandsaw Model C-4038NC, 1.5" Blade, Reconditioned, like Amada, Doall, marvel, Spartan, Hyd-Mech, Hem

Manufacturer

COSEN

Spec Sheet

Overview

Type:

Horizontal Band Saws (Automatic)

Category:

Saws

Manufacturer:

COSEN

Model:

C-4038NC

Condition:

Used - Rebuilt

Year:

2003

Stock #:

8203

Status:

For Sale

Serial #:

09205109

Description

Cosen Model C4038 NC Double column horizontal bandsaw, 16" Capacity, Programmable control, Hyd, VS chip conveyor, Prog, AC variable speed blade drive, Full stroke vises, Work light, Slit front vise for burr free cuts, Complete preventative maintenance and check with recalibration to Factory specs

Long Description

Myers Technology Company Proprietary
50 Point Refurbishing and Repair Process

<ol><li>Myers Technology Company (MTC) carefully examines all major castings for cracks, wear, and weak point failure.</li><li>MTC tests all slide and pivot areas for proper alignment and functionality.</li><li>We start up and test run all equipment.</li><li>MTC ensures that all functions of both manual and autocycles work properly.</li><li>We take note of any missing or failing parts and place orders for replacement parts that meet or exceed OEM standards.</li><li>Once the machine passes inspection on steps 1-5, MTC begins disassembly.</li><li>All guards are removed and inspected for wear or cracks.</li><li>All way covers are removed and ways and covers inspected for wear or tear.</li><li>Machine oil is drained, cleaned and replaced with new oil to proper levels and condition.</li><li>All vices, chucks, and other mechanical control items are removed, cleaned and inspected.</li><li>The machine is thoroughly cleaned using steam, degreasers, and solvents.</li><li>The hydraulic system is tested for noise.</li><li>The hydraulic system pressure is tested for proper settings.</li><li>The hydraulic system couplings are examined and aligned as needed.</li><li>The hydraulic system hoses are inspected and replaced as needed.</li><li>The hydraulic system valves are inspected and tested for proper function.</li><li>Electrical system wires are cleaned and examined for damage or wear, replaced as needed.</li><li>Electrical system switches are cleaned and inspected for damage or wear, replaced as needed.</li><li>Electrical system controls are cleaned and inspected for damage or wear, replaced as needed.</li><li>The electrical system cabinet is examined and cleaned.</li><li>Worn and failing elements of the hydraulic and electrical systems are replaced as necessary.</li><li>Bearings are inspected for proper function and measured for play.</li><li>Bearings are replaced as necessary.</li><li>Motors are inspected and rebuilt or replaced as necessary.</li><li>Motor couplings are removed, cleaned, and examined for wear and failure, replaced as necessary.</li><li>Belts are inspected for wear, cracks, and fraying and replaced as necessary.</li><li>Belts are inspected for proper alignment.</li><li>Gearboxes are cleaned and inspected.</li><li>Oil is drained from gearbox.</li><li>Gearboxes are refilled with proper oil to correct levels.</li><li>Chip conveyors are cleaned and inspected for wear.</li><li>Coolant systems are cleaned and inspected.</li><li>Worn and failing elements of the gearbox, conveyor, and coolant systems are inspected and replaced as necessary.</li><li>Hydraulic fluid is drained and replaced to proper levels in hydraulic system.</li><li>All filters are removed and cleaned or replaced.</li><li>Sheet metal is cleaned and inspected for wear and failure.</li><li>Safety switches are cleaned and tested for proper function.</li><li>Safety switches are replaced as necessary.</li><li>Machine is inspected to ensure steps 1-38 have been properly completed.</li><li>Unit approved for painting.</li><li>All previously painted surfaces are prepped and primed.</li><li>All primed surfaces are given 2 coats of industrial grade paint.</li><li>All systems are reassembled to complete the machine.</li><li>All buttons and switches on control works are inspected for wear and functionality.</li><li>Machine functions are tested for performance.</li><li>Machine is operated in full automatic mode.</li><li>Test cuts are completed and examined for accuracy.</li><li>If unit passes tests in steps 44-47, machine is calibrated.</li><li>A video of the machine is recorded.</li><li>Machine is prepped for proper shipping, tied down, Wrapped, etc.</li><li>Machine is given a 30-, 60- or 90-day Warranty on a case-by-case basis.</li></ol>

There are many more items checked and repaired
This is a general description of Myers Co. process. MTC works on many different types of machines. This marketing document in no way constitutes a contract, written or implied.

Equipped With

Dual Column Design, Programmable control, Chip conveyor, Chip brush, Coolant system with Wash down Hose, hydraulic blade tension, Multiple feed capabilities, Auto Kerf calculations, multiple job memory, Piece counter all available manuals

Specifications

Rect-Cap (H)	15"
Rect-Cap (W)	15.8"
Control	CNC (Cosen)
Dimensions	96" x 98" x 74" high

Type Dual column construction

Cutting capacity 15" X 15.8" Rectangular

Blade width 1.5'

Blade drive AC variable speed

Blade power 5 HP

Control Cosen PC Programmable

Blade tension Hydraulic

Vises, Full stroke hydraulic

chip conveyor Hydraulic variable speed