Marion Paddle Mixer/Blender - 35cu.ft. - Carbon Steel

Manufacturer

RAPID MACHINERY

Category

Miscellaneous Machines

Type

MIXERS, PADDLE

Stock

90-3289

Model

4010

Dealer Location

Ohio

Request a Quote
View Contact Information

Spec Sheet

Manufacturer - Rapids Machinery Company
Model - Marion Mixer 4010
Serial No. - 76079
Trough Size - 36"W x 48"L x 48" deep (Approx.) - Hinged two part cover with inlets and outlets for dust control
Shaft Diameter - 3" Shaft with Four bolt on arms with paddles bolt on
Motor Power - 10Hp, 1745rpms
Electrical Specs - 230/460Volts, 3-Phase, 26/13amps, 50/60Hz,
Gear Ratio - 15.23 ratio thru a Dodge torque arm reducer
Valve - 8" bottom outlet rotating valve
Overall Machine Dims - 92"L x 54"W x 64"H
Machine Weight - 3000lbs approx.
Seller Note: - Mixer was tested as seen in video - Unit was connected directly to power without any soft start or control box - Currently safeties and air powered locks have not been tested and are not functioning.


35cu.ft. Marion Mixer/Blender

Manufacturer:

Rapids Machinery Company

Model:

Marion Mixer 4010 35cu.ft.

Serial No.:

76079

Material:

Carbon Steel

Electrical Specs:

230/460Volts, 3-Phase, 26/13amps, 50/60Hz,

Horsepower:

10-HP, 1745rpms

Shaft Diameter:

3" Shaft with Four bolt on arms with paddles bolt on

Gear Ratio:

15.23 ratio thru a Dodge torque arm reducer

Trough Size:

36"W x 48"L x 48" deep (Approx.) - Hinged two part cover with inlets and outlets for dust control

Capacity:

35cu.ft. — With bottom 8” rotating valve discharge

Bowl Dimensions:

92"L x 54"W x 64"H (approx.)

Manufacture Date:

N/A

Overall Dimensions:

22”W x 14”L x 28”H Approx.(Height with removable handle)

Weight:

Approx: 3000lbs

 

 

Known Issue:

Blender does NOT have safeties/locks attached/working and have not been tested. Mixer/Blender is also not jacketed. Safety switch is not actuated by anything currently. Mixer was powered directly through motor and not a control box. Surface rust inside of trough is just from sitting and moisture in the air.

 

 

Seller Note:

Unit is USED with visible minor surface wear/paint peeling/surface rust and some minor scratches none affecting the functionality or the intended use of the unit. Unit was also previously painted (not by us). Unit was removed from a working environment. What you see in the pictures is what is included in sale (Skidding/Palletizing IS NOT included with the sale, but can be purchased at an extra cost). This unit has been run and tested as seen in video. Unit is being sold AS IS, WHERE IS, AS SHOWN. Pictures and video are of the actual unit being purchased. If the buyer has any questions, please feel free to ask.

 

 

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote