34" X 120" DMG-MORI MODEL CTX GAMMA 3000 TC 5-AXIS SIMULTANEOUS TURNING/MILL CENTER WITH Y-AXIS

Manufacturer

DMG MORI SEIKI

Category

Air Compressors

Type

AIR COMPRESSOR ACCESSORIES

Stock

11571

Model

CTX GAMMA 3000TC

Dealer Location

Illinois

Request a Quote
View Contact Information

Spec Sheet

Specifications
Work area:
Swing dia. Max. 27.6"
Turning dia. Max. 34.6"(27.6)
Turn-Mill Spindle Carrier (Top)
Cross travel (X1) 25.6"(-0.8)
Vertical travel(Y1) +/-7.9"
Longitudinal travel (Z1) 120.1"
Turret Slide (Bottom)
Cross travel (X2) 8.3"
Longitudinal travel (Z2) 112.2"
Main Spindle:
Spindle head (Flat flange) A15
Spindle dia. in the front bearing 8.7"
Clamping chuck 15.7"/19.7"|19.7/24.8
Drive Power (40/100%DC) (HP/AC) 69.7/53.8|79.1/67.1
Max. Rotation 2000 RPM
Counter Spindle:
Spindle dia. in the front bearing 5.1"|(6.3)
Chuck 9/8"/12.4|12.4-19.7"
Drive Power (40/100% DC) HP (AC) 60.3/46.9|(69.7/63.6)
Torque max. (40/100% DC) Ft/Lbs 567.9/442.5|(1622.2/1253.9)
Max. Rotation Speed 4000 RPM
Feed drive AC, Slide 1, Rapid traverse X/Y/Z 1574.8/1574.8/1818.1
Turning-milling Spindle:
Tool reception HSK-63A (HSK-100)
Spindle speed Max. 12,000|(18,000) RPM
Drive power (40 DC) 20/5|(30.8)|(42.9)HP
Torque Max. (40 DC) Ft/Lbs 73.8|(77.4)|106.9)
B-Axis (Torque Drive)
Swivel range (B) 240 deg.
Torque, Max. (40% DC) 2,065.2 ft/lbs
Hydraulic clamping 2,950.2 ft/lbs
Tool Magazine:
Number of tools 80
Tool length 550mm
Tool weight G1/G2 25 kg
Tool diam., Max. (with pocket empty) 110/1140mm
Tool mount (turret, Bottom)
Number of tool stations 12
Driven tool stations 12
Shaft diam. (according to DIN 69880) 1.6"
Drive power (40% DC) 12.6 HP
Torque Max (40% DC) 22.1 ft/lbs
Tailstock:
Tail stock (automatically traversable) 112.2"
Center location MT6
Max. Tailstock pressure 5,620.2 lbf


Equipped With
Siemens 840D CNC Control & 5-Axis Simultaneous Machining 42.9/60.3 HP
Heavy Duty Turn/Mill Spindle with increased Torque HSK 100
80 Position Automatic Tool Changer
Main Spindle HP (67/79 HP) 2000 RPM Spindle, 127mm, 4.9"Inner Dia. of draw Tube
Counter Sub Spindle (46.9/60.9 HP) 104mm, 4.09" Dia. of Draw Tube
Full C-Axis and Hydraulic Chucking Cylinder
600 Liter Coolant System 20 Bar/290 PSI
Tailstock Function for Sub Spindle, Mechatronic Control of the supporting force
Programmable slide for Steady Rest 4.92"-18.11"
20" 3-Jaw Chuck on Main Spindle & 16" 3-Jaw Chuck on Sub Spindle
NOTE: Machine cost new Approx $2,000,000

34.6" X 120" Mori Seiki Usa, Inc. CTX GAMMA 3000 TC 5-AXIS SIMULTANEOUS TURNING/MILL CENTER WITH Y-AXIS,34.6"SWING,27.6"MAX TURNING X 120" CENTERS, 5-AXIS SIMUL.,80 HP,80 ATC,B-AXIS HEAD,Y-AXIS,SIEMENS 840D, NEW 2012

Stock Number
11571

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote